Oliver Help
Oliver is a two-panel file manager: Total Commander’s keyboard, the Finder’s look and
mouse. Most of it works as you’d expect from either. This help explains what isn’t obvious.
Press F1 to open it at any time, and ⌘F to search in it. ⇧⌘P (Help › Find a
Command…) finds any command, the menus’ and your own, by part of its name (“new f”, “sync”,
or the initials “nf”): ↑ ↓ choose, Return runs it, Esc closes. Commands that can’t
work right now show grayed. It also finds places: your hotlist, saved servers and clouds,
the folders you were in lately, a path you type (/…, ~…), your sync jobs, saved
searches and saved tab sets. Return opens a place in the active panel, ⌥Return in the other one,
⌘Return in a new tab.
The window
- Two panels. One is active: it has a line in the accent colour along its top and its path tinted. Tab switches panels. Most commands work in the active panel and use the other panel as the target (copy goes to the other panel). Commands that can’t do anything right now (Compare with a folder marked, Disconnect on this Mac, Copy with nothing under the cursor) are grayed in the menus, the toolbar and the F-key row; the right-click menu shows extras only where they fit (Unpack on an archive, Verify Checksums on a checksum file). Go › Swap Panels (⌘U or ⌃U, Total Commander’s Source ↔ Target) swaps the two sides with their tabs; Go › Same Folder in Other Panel (⇧⌘U, Target = Source) shows the active panel’s folder there. View › Browse Both Panels Together moves the other panel with the active one: into the folder of the same name, or up. When the other side has no such folder (or you jump elsewhere) it switches itself off and says so. View › One Panel shows only the active panel, as the Finder does; Tab shows the other one in its place. F5 and F6 still go to the other panel’s folder, and their dialog has a Places menu: the other panel, the folders you went through lately and the hotlist. What needs both panels in view (Compare Folders, Synchronize Folders, Quick View, Swap Panels, Same Folder, Browse Both Panels Together, Open in Other Panel) is gray then. View › Panels Stacked puts one panel above the other (a double-click on the line between them makes them equal). Both are remembered on each Mac.
- Tabs. Each panel can have tabs: ⌘T opens one, ⌘W closes it, ⌃Tab moves to the next. Tabs and folders are remembered when you quit. Window › Lock Tab (or the tab’s right-click menu) keeps a tab on its folder: going elsewhere from it opens a new tab; it shows a lock. Window › Save Tabs… keeps both panels’ tabs under a name, and Window › Saved Tabs opens them again (Total Commander’s favourite tabs).
- Sidebar (left, ⌃⌘S shows or hides it): what your Finder’s sidebar shows: AirDrop (click it to send the marked files, or the one under the cursor; or drop files on it: macOS’s AirDrop sheet lists the devices nearby, and nothing goes until you choose one; with nothing to send, a bubble at AirDrop says what to do; files sent to you land in Downloads; who may find your Mac is set in Control Centre), Recents, your Favourites, iCloud Drive, Locations (cloud folders, every disk once with ⏏, your servers (with ⏏ while a tab shows one), the Bin), your Saved Searches (from Find Files; a click searches) and Tags. Recents shows the documents, pictures, media and archives you have opened, as the Finder’s Recents does (the last 500): by their names, the most recently opened on top, with the Date Last Opened column in place of Date Modified; the path bar shows the folder of the file under the cursor (click a part to go there); the window and the tab are called Recents, and the sidebar keeps Recents highlighted. Sorted otherwise there (click a column title), the panel takes its own order back once you leave Recents. In cloud folders (OneDrive, Dropbox, Google Drive) it lists only files you opened yourself, since their apps mark a file as used whenever they download it. A tag shows its files by their names in the same way. Bin shows in a panel; the first time, Oliver asks for Full Disk Access (macOS protects the Bin). Go › Bin opens it from the keyboard. In the Bin, right-click › Put Back… opens the Finder’s Bin with the item selected (⌘⌫ there puts it back; only the Finder knows where items came from); Empty Bin… (⇧⌘⌫) deletes everything in it. A click opens the place in the active panel; ⌥-click opens it in the other panel. As in the Finder, files dropped on a folder in the sidebar (a favourite, a disk, iCloud Drive, a server) go into it: on the same disk they move, elsewhere they are copied (⌥ copies, ⌘ moves). Drag a folder between two Favourites to add it, drag a favourite to move it, and right-click › Remove from Sidebar to take it out; the Finder’s sidebar changes too. A folder the Finder can’t open (on a server, inside an archive) goes to the hotlist instead. A favourite on an SMB share that isn’t connected opens through Oliver’s own connection (as Connect to Server… does: it asks for the password if none is saved, says within 15 s if the server doesn’t answer, Esc gives up); macOS doesn’t connect the share. Any other favourite that isn’t connected is connected by macOS, as the Finder does.
- Above each panel: the location menu (the disk or server, with free space, and places
such as Applications and Utilities; ⌥F1 and ⌥F2 open the left and right one), and the path bar. Click a part of the path to go
there; double-click the path (or ⇧⌘G) to type one; right-click it for Copy Address
or to open the folder in the other panel. The
*button is the hotlist, the▼button the folder history. - Addresses shown anywhere (a sync job’s folders, the hotlist editor, Get Info’s
Where, Compare’s file and folder, the path bar): right-click for Copy Address (the
whole address,
sftp://…or a path; never a password) and Open in Left Panel / Open in Right Panel (Show in … for a file: its folder opens with the cursor on it). - Below: the status line (items, marks, sizes; what is happening), the command line, and the F-key row, which you can also click.
- The toolbar has Total Commander’s buttons and the Finder’s: the four views, Share, Tags
and ⋯ (the right-click menu), and a search field. It finds names holding what you type
anywhere, extension included, with no
*needed:aifffindsRaiffeisen.pdf,pngevery PNG. With a*or?it is a mask the whole name must fit, as in Total Commander:*.rfinds only names ending in.r,Geo*names beginning with “Geo”,*aiff*the same asaiff. In quotes, only that very name:"bbb.cc"findsbbb.cc, notGGGbbb.ccccc. Several go with;(pdf;xlsx: either), names to leave out after|, written as masks (report | *.bak: “report” anywhere, but not names ending in.bak). A space belongs to the name (Foto A); case and accents don’t matter. The cursor goes to the best match: forA.png, the file of that very name, thoughAa.pngis found too. It searches the folder shown and everything below in the background: after a short pause in typing the panel shows the matches as they turn up (each with its path below the folder), nearest folders first, and you can work on them at once; the status line counts them and the folders searched so far, and names the one it is in (“Searching… 2 found in 1,240 folders”). Esc in the panel or..stops the search and shows the folder again, also once it has ended. App packages and hidden folders (while hidden files are hidden) aren’t searched; it works on servers (several folders read at once) and in archives too. Its menu: This Folder Only filters the panel as you type instead, This Mac asks Spotlight for the names (Contents Too reads inside files as well). Return or ↓ goes on to the panel, Esc in the field empties it and shows the folder again. The field’s menu (click the magnifier) lists your last ten searches: pick one to search for it again, or Clear Recent Searches. A search is kept once you used it (Return, ↓ or a click into the panel), not at every pause in typing. Each Mac keeps its own. ⌥⌘F jumps to the field; ⌘F stays Find Files. When the window is narrow, the Mac folds the view buttons into one and the search field into a magnifier; Customize Toolbar… (right-click the toolbar) removes buttons you don’t need. - Right-click an item for the Finder’s commands, Pack…, and what fits that item: Unpack… on an archive, Compare by Content… when two files are marked or the other panel has a file of the same name, Verify Checksums on a checksum file, Combine Files… on a split part, Show Package Contents on an app, Open as Archive on any other file, Show in Enclosing Folder in results. The other tools are in its Tools submenu.
Cursor and marks
Two different things, as in Total Commander:
- The cursor is the highlighted row you move with the arrow keys. Return, F3, F4 and the like work on the item under the cursor.
- Marked items are the ones you picked; they show in a different colour. Copy, move, delete, pack and most tools work on the marked items, or on the cursor’s item when nothing is marked.
How to mark:
| Keys | What they do |
|---|---|
| Space | mark or unmark the item under the cursor and move down (on a folder it also calculates its size) |
| ⇧↑ / ⇧↓ | mark while moving |
| ⌘A / ⌥⌘A | mark all / unmark all |
| ⌘= / ⌘- | mark / unmark by a pattern, e.g. *.pdf |
| ⌥⌘= | mark all files with the same extension as the cursor’s |
| ⇧⌘8 | invert the marks |
| ⌥⌘R | Restore Selection: marks again what was marked before the marks were last cleared (after a copy, Unmark All, or going to another folder), as Total Commander’s Num / |
| ⇧F2 | Compare Folders: marks what differs from the other panel: items only on one side, the newer of two files, both when only the sizes differ (subfolders aren’t looked into) |
| mouse | a click picks one item; ⌘-click adds or removes one; ⇧-click picks a range; drag a rectangle from empty space (below the items, or a row away from its icon and name) to mark what it crosses, with ⌘ or ⇧ to add to the marks |
Moving around
- Return (or ⌘↓) opens the item under the cursor: a folder goes in, a file opens in its app, an app starts, an archive opens like a folder. On the .. row, Return goes up.
- Backspace or ⌘↑ goes up; ⌃\ goes to the top of the disk or server.
- ⌘[ and ⌘] go back and forward; ⌥↓ shows the folder history (the last 100 folders of each tab, kept when you quit). Saved places never drop out of anything: the hotlist and your servers stay until you remove them.
- Typing letters jumps to a name holding them anywhere (quick search): first to a name
that is the text or begins with it, else the first one holding it;
*and?work as wildcards. ↑ and ↓ go to the previous and next match, Return opens, Esc ends the search. When no name holds the text it turns red and the cursor stays; Backspace takes the last letter away. - Hotlist (⌃D): your own list of folders, local or on servers. Add Current
Folder… asks for a name (for a folder on a server, its server’s name is suggested too:
“data (imac)”); names are unique. Edit Hotlist… renames, reorders and removes entries,
puts them in submenus (
Work, orWork/Clientsfor one inside another), and points an entry elsewhere: type its Folder as in Go to Folder (~/…, a path, a server address) or click Use Current Folder for the active panel’s. A folder is listed once; one not on this Mac (moved, a disk not plugged in) is kept with a warning. The entry you are in is ticked, and its name is the tab’s title there. - Go to Folder (⇧⌘G): type a path or a server address.
Views and sorting
- ⌘1–⌘4: Thumbnails, List, Brief (names in columns), Tree. In the tree, moving the cursor shows each folder in the other panel; Return goes back to the list.
- Thumbnails on a server: pictures and PDFs up to 30 MB on a server show their picture too. Oliver downloads only the ones in view, three at a time, makes the thumbnail and deletes the download; scrolling past a picture before its turn skips it. Thumbnails are kept until Oliver quits, so going back to a folder costs nothing. Videos, bigger files and items inside archives keep their icon.
- Sorting: click a column header, or ⌃F3–⌃F6 (name, extension, date, size); the same key or click again turns the order round. Dates start with the newest and sizes with the largest, as in the Finder. Folders come first, except by a date: then they mix in with the files, so the newest item is on top whatever it is. Date Added (when the item came into the folder: downloaded, moved, unpacked) sorts from its column or View › Sort by Date Added: the right order for Downloads, where an unpacked file keeps its old date. Date Last Opened (by any app) sorts from its column, as Recents does.
- Columns: right-click the column titles to show or hide them: besides name, date, size, kind, extension, date created and permissions, also Comment, Date Added, Date Last Opened, Version, Tags and Owner (files on this Mac; the comment on servers too). In a narrow panel the name keeps room to be read: the columns that don’t fit step aside for the moment (the extra ones first, then Kind, then the date or, in Recents, Date Last Opened; Size last) and come back when the panel is wider. What you chose to show stays chosen.
- The divider between the two panels stays where you leave it, also after a restart; a double-click on it makes the panels equal.
- Media columns (on this Mac and on servers): Date Taken (photos, videos), Dimensions (pictures and videos, as shown: a portrait photo is tall), Duration (videos, music), Camera, Location (where a photo or video was taken), and a song’s Artist, Album and Title. They are read from the files themselves (JPEG, HEIC, RAW, PNG, MP4, MOV, MKV, MP3, M4A, FLAC, …) while such a column shows, rows on top first; the status line says how far it is (“reading media details: 120 of 3,000”). On a server only the few pieces of each file that hold them are fetched. A click on the title sorts by it (all but Location): newest, largest or longest first, files that say nothing last; the order follows once every file is read. A camera’s clock has no time zone: its date shows as the camera wrote it; a video’s date (kept in world time) shows in this Mac’s.
- Comments (⌃Z, File › Edit Comment…): a note on a file or folder, kept the way
Total Commander keeps it, in a
descript.ionfile in the folder (hidden), so it travels with the folder and TC reads it too. Renaming, copying, moving and deleting take the comment along. - Sizes: apps and other packages on this Mac show their size by themselves, as in the
Finder. Folders show
--until you calculate them: Space for the one under the cursor, ⌥⇧↩ for all of them. - Get Info (⌘I): the Finder’s own Info window for items on this Mac (one per item); for an item on a server or inside an archive, Oliver’s own sheet, which for a photo, video or song also shows the date taken, size in pixels, length, camera, place, title, artist and album.
- ⇧⌘. shows or hides hidden files. ⌃F12 sets a filter (
*.jpg;*.png), shown on the path bar until you clear it. - Branch view (⌃B): every file of every subfolder in one flat list. ⌃⇧B does it for the marked folders only (and shows the marked files with them). While it reads, the status line counts the files found; Esc stops it, and so does ⌃B again. Once it shows, ⌃B (or its toolbar button, blue while on) goes back to the folder. Hidden folders are read only while hidden files show (⇧⌘.); apps and other packages are listed as one item each, as the Finder shows them. Past 100,000 files it asks whether to go on.
- Quick view (⌃Q): the other panel previews the file under the cursor (pictures, PDF, media, Office files, text).
- Quick Look (⌘Y) shows the marked items, or the one under the cursor; ← → step through several, Esc, Space or ⌘Y close it. A folder shows its size counted as it goes (“Calculating… 1,234 items, 3.2 GB”), here and on a server. Files on a server or in an archive are fetched first when they are up to 50 MB (pictures, PDFs, text, audio, video, Office files); bigger ones show their size and date without a download, and F3 views any size piece by piece.
- ⌃R reads the folder again (Oliver also notices changes by itself).
Copying, moving and deleting
- F5 copies and F6 moves the marked items (or the cursor’s) to the other panel’s folder. You can change the target in the dialog: a name without a path means “in this folder”. ⇧F6 or ⌘R renames in place; F7 makes a folder, ⇧F4 a file.
- F8 moves to the Trash; ⇧F8 deletes immediately, after asking.
- Copies and moves run in the background: the transfer list shows progress, with Pause and Stop. Stopping leaves no half-written file. An analysis or a sync that runs shows there too, on top, with Show to go back to it. Each job says what it works on (“Deleting “Movies 2019” and 4 more”). Jobs on the same disk or server run one after another, in the order you started them (“Waiting for the jobs before it”), as Total Commander queues them; jobs on different disks run side by side. The list shows the first three; +N more · Show All makes it grow in place to every job (eight in view, the rest scroll), Show Fewer goes back to three, and Stop All stops every job in it. To and from a server, and between two disks of this Mac, four files go at once (a share answers each file in its own time, whatever its size, and a disk keeps busy while the next file starts, so many photos one by one were slow; for servers, Settings › Transfers changes the number); questions about files already there still come one at a time. A file to or from a server (or another disk) that fails because the connection dropped or the server was busy is tried again by itself, twice unless Settings says otherwise. Between two disks the copy goes through the Mac’s memory cache, and at the end the job has the disk save everything, so a disk you unplug after the job ended holds every file; a move removes an original only once its copy is on the disk. The line under a job names the files being copied (“IMG_0412.mov and 3 more”: the one under way longest first). Its speed is that of the last 20 seconds. The time left comes from the whole copy so far: the time spent copying and what is done, against what is left. When the job learns that small files cost more than their size (a stretch of big videos, then many photos), it counts a part for each file and a part for its bytes, so it doesn’t jump from minutes to hours. It changes at most every 5 seconds and is rounded (“about 1 h 20 min left”). Counting, pauses and waiting don’t count. Folders keep their dates, also when they are moved.
- Quitting while transfers run (⌘Q, or closing the window) asks first and says what is running and how far it got: Quit When Done quits by itself once they have ended (the window says so under its title; a failure or Stop cancels it, so you see it), Quit Now stops them part-way, Cancel keeps Oliver open with the window showing them.
- When an item is already there you can Replace, Replace if Older, Skip, Keep Both (adds a number), or Compare the two files first, once or for all.
- Write-protected items (a folder copied from a CD or DVD keeps the disc’s read-only permissions; the Finder’s Locked): nothing can be deleted from such a folder or moved out of it, so a move to a server would copy the files but leave the originals. Oliver asks, as Total Commander does: Move Anyway / Delete Anyway makes the folder writable (or unlocks the item) for this job and sets it back afterwards on whatever is still there; Skip leaves it as it is, once or for all. Only for your own items; anything else goes to the administrator (below).
- In the copy dialog: Only files copies just the files matching a mask (
*.jpg;*.png), inside folders too, without making folders that would stay empty; Verify after copying reads each copy back and compares it with the original (a move removes the original only after that). Its default is in Settings. When items exist decides at the start what happens to items already there: Ask (at each one, the usual), Replace Older, Replace All, Skip or Keep Both, so a big copy left alone never waits at its first one. Each copy starts on Ask. - Basket (Tools, as Total Commander’s VirtualPanel): gather files and folders from any
folders and servers with ⌥⌘B (Add to Basket, also in the right-click menu), then
⇧⌘B (Show Basket) lists them in the panel, where F5, F6, F8 and the rest
work on them as on any items (they act on the real files). Remove from Basket takes
items out of the list only; Empty Basket clears it. The basket stays after quitting;
items moved or deleted meanwhile leave it.
..goes back to the folder. - Try Again: when a copy or move stopped or failed part-way, its message offers Try Again, also in the File menu. It runs again and passes over the files that arrived before (same size and date); everything else is copied as usual.
- Undo (⌘Z, Edit › Undo, which names what it takes back: “Undo Move of 3 Items”): the last file operation, then the one before (up to 20). A move, rename or Multi-Rename goes back; what a copy, New Folder or New File made goes into the Bin (on a server, which has no Bin, it is deleted); what went into the Bin comes back out. Nothing is overwritten: an item whose old place was taken meanwhile stays where it is, and the report says so. Files a copy replaced and items deleted for good can’t come back, so they aren’t offered. In a text field (renaming, the path), ⌘Z undoes the typing as usual.
- Operations log (Tools › Operations Log): every copy, move, delete, rename, new
folder and pack is written down with its items, target and result, in
operations.login the settings folder. Switch it off in Settings. - Drag and drop works within Oliver and with the Finder, servers included. Where a
drop lands:
- on a folder’s icon or name: into that folder;
- anywhere else in the list (beside a name, on the size or date, on a file): into the folder the panel shows, the whole panel outlined. So a folder full of folders still takes a drop for itself;
- on ..: into the enclosing folder;
- on a part of the path bar: into that folder (its free space: the panel’s folder);
- on a tab: into the folder of that tab, without switching to it. The same in Brief and Thumbnails (a folder’s picture or name). On one disk or server a drop moves, elsewhere it copies; ⌥ copies, ⌘ moves. Spring-loaded folders: hold a drag over a folder’s icon or name, over .., over another tab or over a part of the path bar for a moment, and it opens there (a tab shows), so you can drop deeper without letting go. The moment is the Mac’s own (System Settings › Accessibility › Pointer Control › Spring-loading); switched off there, it is off here too. A drag that starts on a row away from its icon and name draws a rectangle that marks, as in the Finder; to drag items, take them by their icon or name (marked items can be taken anywhere on their rows).
- ⌘C / ⌘V copy and paste items like the Finder; ⌥⌘V moves them here. This works for items on servers and in archives too: copy them in one panel, paste them in the other (or in another tab). Files on this Mac can also be pasted in the Finder; an item on a server pastes in other apps as its address (to bring it into the Finder, drag it there). Paste is grayed while the clipboard holds no items.
- Places you may not change (an app the system owns in /Applications, a folder in /Library): when copying, moving, deleting, renaming or making a folder there is refused, the message offers Use Administrator Password…. macOS asks for the password in its own dialog (Oliver never sees it) and the refused items are done again with an administrator’s rights. Only items on this Mac; folders macOS itself protects stay protected.
Viewing and editing
- F3 opens the viewer, which reads only what it shows, so a file of any size opens at once, on servers too. Keys in the viewer: 1–4 text, binary, hex or preview; W wraps lines; ⌘F (or F7) searches, F3 / ⇧F3 find the next / previous; G goes to a line, offset or percentage; N / P show the next / previous file; Esc closes. A search through a big file shows how far it got; Esc stops it and keeps the file open. Going to a line far into a huge file counts the lines up to it the first time; jumps after that start from the lines already counted.
- F4 opens the file in your editor. The first time Oliver asks which app to use (and again if it’s gone). For a file on a server, Oliver downloads a copy, and each time you save it sends the file back; if the file changed on the server meanwhile, it asks first.
- Return on a file on a server downloads a copy and opens it, for reading. Changes to that copy are not sent back; use F4 for that.
Servers and clouds
Network: the globe in the toolbar lists the machines your Mac finds on the network (a NAS, a router’s share, Macs with file sharing on) by the names they announce; pick one to open it, shares and login as usual. Browse Network (⇧⌘K, also in the Go menu) shows them as folders in the panel; .. goes back. Only machines that announce themselves show up; Connect to Server… (⌘K, also in the globe’s menu) reaches any address. The first time, macOS asks whether Oliver may find devices on the local network.
Connect to Server (⌘K) takes an address; so does the path bar. Examples:
| Address | |
|---|---|
sftp://user@server/folder |
SSH (SFTP); /folder starts at the top of the server |
sftp://user@server/~/folder |
a folder in your home folder there |
sftp://user@server:2222/folder |
another port: put it after the server name |
smb://server/share/folder |
a Windows share or a NAS |
ftp://, ftps:// |
FTP, and FTP with encryption |
dav://, davs:// |
WebDAV |
s3://connection/bucket |
Amazon S3 and compatible storage |
- Server names. The first time a server opens, Oliver asks for a name for it, filled
in with the server’s own name when SSH lets it ask (“FILESERVER”), else its address and port
(
nas.local:2222). The name shows in the location menu, the path bar, the tabs and the sidebar; Rename Server… in the location menu changes it. Useful when several servers sit behind one address on different ports. Two logins to the same server (as different users) show the user in front,ana@nas, until you name them. - Disconnect (⌘E, Go menu; the first item of the location menu on a server; the ⏏ next to the server in the sidebar, or its right-click menu): every tab on that server goes back to the folder on this Mac it came from (your home folder if there’s none). If files are still being copied to or from it, Oliver asks first. The connection closes at once (if something is still running on another server, within a minute). The login stays.
- Logins are asked the first time and kept in the Keychain, all in one entry called
“Commander logins” (the app’s working name), which Oliver reads through Apple’s own
securitytool, so an update never asks for the Keychain again. (Any program you run could read it the same way, as with MultiSync’s settings.) Forget Login in the location menu disconnects the server, removes its login (for Google Drive, OneDrive, Dropbox and S3 the sign-in or keys too) and takes it out of every tab’s history; your hotlist entries stay and ask you to log in or sign in again. Your~/.ssh/config(host aliases, ports, keys) and the ssh-agent work as in the Terminal. - New SSH servers show their fingerprint before Oliver trusts them. If a server’s identity changes later, Oliver refuses to connect and says so.
- Copy Public Link (Edit menu, and the right-click menu in a cloud or S3): a link anyone can open to the item under the cursor, made by the service (a shared link in Google Drive, OneDrive and Dropbox; a signed link that expires in S3), put on the clipboard.
- Google Drive, OneDrive and Dropbox: Sign In to … in the location menu opens the sign-in in your browser, once. Files stay online; only what you open is downloaded. A company Microsoft account may need your administrator’s approval first. The sign-in can use your own client ID (below); signing in again keeps the one a connection has. While the browser is out, Oliver shows that it waits, at most 10 minutes; Cancel ends the sign-in, and starting a new one ends one left unfinished.
- When a server doesn’t answer (the VPN is off, for example), the status line says “Opening … Esc stops.” Esc gives up and the panel stays where it was. After about 15 seconds Oliver says why the server can’t be reached. A tab that opens a server at start and can’t reach it goes to your home folder instead; ⌘[ (Back) tries again.
- After the network changed (Wi-Fi, the VPN, a cable) or the Mac slept, Oliver drops its connections to every server and makes new ones on the next use, since the old ones may be dead without a word. A folder still opening tries again by itself. If a server folder failed or got stuck, Refresh (or opening it again) starts with new connections too. While files are copied or synced on a server, its connections stay as they are.
- Servers on your home network (a NAS, a share at home) need macOS’s Local Network permission, which macOS asks for the first time and ties to the exact version of Oliver. When a new version is installed while Oliver runs, Oliver says so and offers Restart Now: until it restarts, macOS may block the old copy’s way to those servers (“can’t be reached: the Mac finds no way to …”). The menu-bar sync helper restarts by itself between runs. If the message stays after a restart, allow Oliver in System Settings › Privacy & Security › Local Network.
- Free space next to a server’s name, as for a disk: “95 GB of 126 GB free”. On an SFTP
server it is that of the disk the folder is on (what
dfreports), on SMB that of the share, on WebDAV and the clouds what they report (some only the free space). Plain FTP and S3 can’t tell, so nothing is shown. - Opening a server’s folder needs no extra step; servers you used appear in the location menu and the sidebar.
Your own client ID for Google Drive
Oliver signs in to Google Drive with a shared ID that comes with rclone, the program Oliver uses for clouds. rclone retires it during 2026; from then on Google Drive needs your own ID. Making one takes about fifteen minutes and is free. You need a Google account (any one: it doesn’t have to own the Drive you open).
- Open the Google Cloud console and create a project (any name, e.g. “Oliver”).
- Turn on the Google Drive API for it: Enable.
- Open Google Auth Platform and Get started: an app name (e.g. “Oliver”), your address as the support address, External, your address again as the contact, accept the terms, Create.
- Under Data Access, Add or remove
scopes, and add these three by hand, then Save:
https://www.googleapis.com/auth/docs,https://www.googleapis.com/auth/drive,https://www.googleapis.com/auth/drive.metadata.readonly. - Under Clients, Create client,
application type Desktop app, Create. Google shows the client ID (it ends in
.apps.googleusercontent.com) and the client secret (it begins withGOCSPX-). - Under Audience, Publish app and confirm. Without this, Google ends the sign-in after a week. (If the button is grayed, Google wants a home page and a privacy page under Branding; for yourself, Add users under Test users with your own address instead, and sign in again each week.)
- In Oliver: Sign In to Google Drive…, tick Sign in with my own client ID, paste the two values, Sign In. To give a Drive you already use its own ID, sign in again with the same connection name.
At the sign-in Google warns that it “hasn’t verified this app”: it is your own app, so choose Advanced and Go to … (the name you gave it). If Google later refuses the shared ID, Oliver says so and offers this. OneDrive and Dropbox take an own ID the same way (Microsoft’s app registrations, Dropbox’s App Console); they don’t need one yet.
Archives
- Archives open like folders: zip, 7z, rar, tar, tar.gz, tar.bz2, tar.xz, gz, bz2,
xz, iso, cab and more, and zip files under other names (jar, war, ear, aar, apk, whl,
nupkg, xpi, vsix), also on servers and inside other archives. Nothing is unpacked next
to them;
..goes back out. ⌃⇟ (Ctrl+PgDn, or right-click › Open as Archive) opens any file as an archive (a.docxis a zip). - F5 copies files out of an archive, F6 moves them out. Onto your Mac they come out
as the Finder unpacks them: links stay links, programs stay executable, and what a Mac
keeps beside a file (its extended attributes, tags, an app’s signature parts) comes back,
so an app unpacked with Oliver still opens. Archives made on a Mac hold those as hidden
._namefiles and a__MACOSXfolder; Oliver doesn’t show them and takes them along when you delete or rename an item inside. What comes out of a downloaded archive keeps the “downloaded from the internet” mark, so macOS checks an app before it first opens, as after the Finder’s unpacking. - Changing an archive (zip and zips under other names, 7z, tar, tar.gz, tar.bz2, tar.xz): copy or move files into it (F5/F6 to a panel showing its inside, drag and drop, ⌘V), delete (F8/⇧F8: archives have no Trash), rename (⇧F6) and make folders (F7) inside it. Files already there are asked about as in any copy. A protected archive keeps its password: what you add gets it too. An archive on a server is downloaded, changed and sent back; if someone changed it there meanwhile, nothing is sent. 7-Zip only reads rar, iso, cab and the like, and an archive inside another archive or in parts can’t be changed: copy it out first.
- F4 inside an archive opens a copy in your editor; each time you save, it goes back into the archive (as with files on servers). From an archive that can’t be changed, the copy is read-only and the message says why.
- Archives in parts (
photos.7z.001,photos.zip.001,photos.part1.rar) open from their first part, the other parts beside it (on a server, all parts are downloaded). - Unpack (⌥F9) unpacks a whole archive into the other panel’s folder.
- Pack (⌥F5) packs the marked items into the other panel’s folder: zip (with an
optional password, AES-256), 7z (password, and names hidden too), tar, tar.gz, tar.bz2,
tar.xz, or one file as gz, bz2 or xz. In parts of … MB makes
name.001,name.002… (for a mail or a disk with a size limit). - Protected archives ask for the password once; it is kept until you quit.
- An archive on a server is downloaded once before it opens; the status line shows how far (“Downloading “x.tar.gz”: 1.2 of 5.0 GB”), and Esc stops it. It opens at once the next time, unless it changed on the server.
- On an SSH server that can run commands, Return on an archive asks whether the server should unpack it itself, which is much faster: into this folder, a new folder named after the archive, or the other panel’s folder there. Files already there are kept or replaced, as you choose. Pack (⌥F5) then offers Pack on the server too. SFTP-only accounts, SMB, FTP and clouds can’t run commands; there everything goes through your Mac.
Comparing and synchronizing
- Compare by Content (⇧⌘C) compares two marked files, or the cursor’s file with the one of the same name in the other panel. First it reads both byte by byte, as Total Commander does: identical files get a message only, with both paths. If that takes more than a moment, a small window shows how far it got; Esc stops it. Files that differ open side by side. Text: differences in colour, the changed words stronger; both sides can be edited, blocks copied across with the arrows, and saved (also to a server). When the texts read the same but the bytes differ (line ends, the byte-order mark), the status line says why and Binary shows the bytes. Binary files and files over 32 MB are compared in hex, opened at the first byte that differs; ⌥⌘↓ / ⌥⌘↑ find the next / previous difference, and Esc stops a long search. A file that is the other’s start (a download that broke off) is said so. The window shows the speed and the time left.
- Big files on a server (256 MB and more) aren’t read through at once. First 64 samples
spread from start to end are compared, which takes a second or two: two different files
differ there, and the compare opens at once. When they all match, a server that can give
its file’s checksum without sending the file (an SFTP server with
sha1sumormd5sum, most clouds) settles it: the file on this Mac is read here, the server reads its own, and the message says which checksum was compared. An SMB share can’t do that, so the files are very likely identical: Check Every Byte copies the server’s file to a temp folder here (as fast as F5) and compares every byte; the copy is removed afterwards. Samples miss a single damaged byte between them, so check every byte when that matters. - The sync screen: Synchronize Folders, Sync Jobs and a job from the menus show in the window in place of the panels and the sidebar, with ‹ in the toolbar to go back to the panels (also Esc when nothing runs, ⌘[, ⌘W). Going back never stops anything: an analysis or a sync goes on in the transfer list under the panels, where Show comes back to it. An analysis that finishes while the panels show leaves a line there (“Analyzed “Documents”” with what it found), Review to look at it, ✕ to put the line away (the result stays in the sync); Activity’s button gets an orange dot until then, and a notification says so when Oliver isn’t in front. Coming back to an analysis older than ten minutes, the line under the rows says how old it is; a sync of it checks each file first and leaves alone what changed since. Synchronize Folders on the same two folders comes back as you left it. A second window (File › New Window) can show another sync.
- Synchronize Folders (Tools) compares the two panels’ folders (Total Commander’s idea;
it remembers nothing). When the two panels show the folders of a saved job, it opens that
job instead, with its memory. Otherwise it shows each difference with its buttons: → to
the right, ← to the left, ○ leave it (see the rows below). Return analyzes again;
⌘↩ (or Sync) carries it out, so a Return never starts a sync by accident. Compare
contents also reads files of the same size. While it analyzes or syncs, that button turns
into a red Stop (also Esc or ⌘.). Two folders where one is inside the other (or the same
folder twice) are refused: syncing would copy a folder into itself. It leaves nothing
behind in the folders: a file it replaces goes to the Trash (on a server it is simply
replaced, as in Total Commander). In a folder that belongs to a sync job (it has a
.multisyncfolder), a replaced file is kept in that job’s Deleted Items instead, where Put Back returns it. A file that differs on both sides is left alone until you click its arrow. Save as Job… (⌘S) keeps the two folders as a sync job (below), which remembers from its first run on. - The tree (as in GoodSync): the rows sit in their folders; a folder shows how many rows
are below it, their sizes on each side, and its own ← ○ →, which points everything
below it at once (the circle is filled when they all go one way). Folders that only hold
one other folder share a line (“vlada/Dokumenti/Trst”). A small tree opens fully; a big
one opens its first levels. The bar under the two folders shows how far the work is:
for a job that has run before, the analysis counts against the items of its last run
(holding just short of full until it ends); on a first run, or for two panels’ folders,
it counts against the folder read first once that one is read (both sides of a sync are
mostly alike: often this Mac’s folder is read in seconds while a server takes minutes).
Until then the bar only moves (as it does at the start of every analysis, while a server
is reached, until the first items are counted). Compare
contents fills it file by file, and a sync by its files and bytes together, so many small
files move it as well as one big one. While analyzing, the line at the bottom counts the
items read in each folder (“left folder 7,409 ✓ · right folder 3,120”; ✓ once a folder is
read), with the speed (items a second) and about how long is left, measured as the bar
is; once both folders are read it says “comparing…”. A folder on a server is read in
one request: its count is what the server has listed so far, including what the job
leaves out (such as GoodSync’s
_gsdata_), so it can end a little lower. - The rows (as in MultiSync): each file with both sides’ size and date, the choices ← ○ → (and ⇆ to keep both versions of a conflict), what the row does (in bold when you changed it) and why. What the row will do is the filled circle: green copies, red deletes, orange a conflict, gray leaves it alone; the arrow points to the side that changes. The other choices are gray and light up under the mouse; a click picks one. The bar above shows one kind at a time with its count: → Right, ← Left, Delete, Conflicts, Left Alone, Skipped (what the analysis left out, and why). Undo My Changes puts every row back. Right-click: a direction for all selected rows (Copy to the Right, or Make the Right Like the Left where that also deletes what the left hasn’t), and Delete on the Left, Delete on the Right, Delete on Both Sides: the items go where they are, whatever the other side has, a folder with everything in it (folders both sides have stay, emptied; what only the other side has is left alone this time). Nothing is deleted until you press Sync; a job’s deleted items are kept in its Deleted Items, Synchronize Folders’ go into the Trash. Something deleted on one side only that the other side still has comes back with the next sync: delete it on both sides to be rid of it. And in a job Exclude “file”, Exclude the Folder, Exclude All *.ext Files from Now On, which adds it to the job’s filters and analyzes again; for the row clicked, Copy Left Address / Copy Right Address, and Show in Panels (the left side’s item in the left panel, the right side’s in the right, where it is there). Pause holds the analysis or the sync after the files at work; Resume goes on. Once paused, everything copied so far is on the disks, so a disk can be ejected meanwhile; Stop and the end of a run do the same before the run is recorded. (Files are handed to the disk as they are copied; making the disk empty its own cache once per run rather than after every file makes small files about five times faster. A run whose disk was pulled before then isn’t recorded, and the next run compares those files again.)
- While it syncs each row turns ✓ done, ⚠ skipped or ✗ failed (point at it for why), the table follows the rows at work until you scroll, and below it a bar shows how many rows and bytes are done, the speed (last 20 seconds) and the time left (from the whole run, as for copies: steady, changed at most every 5 seconds), with the files being copied now. At the end: a summary, and the log of every row (Show Log, Copy Log), which opens by itself when something was skipped or failed.
- Sync Jobs (Tools) are saved pairs of folders that remember their last run;
Tools › Sync lists them, and choosing one opens it and analyzes it at once. They tell
changes on both sides apart from deletions, keep deleted files and earlier versions, and can
put them back. For that, each job keeps a hidden
.multisyncfolder in both of its folders (its memory, deleted files and earlier versions for 30 days, and a lock while it runs), the same as MultiSync’s, so the computers syncing one folder share one memory. When an analysis finds both sides the same, Sync still records them as they are: for a new job on two folders already alike that matters, since a file deleted afterwards on one side is then deleted on the other too (until a job has run once, it copies such a file back). A job has three pages, switched above its rows: Changes (what an analysis found), Deleted Items and History. - Deleted Items lists what the job keeps of deleted and replaced files, on both sides, newest first: each with the folder it was in, the side (by its folder’s name), when it went, its size, and whether it was Deleted (nothing has been in its place since the last run) or Replaced (an earlier version of a file that is still there). Deleted is shown first; Replaced and All are a click away, and the search field finds names and folders. While both folders are read (on a server that can take a while), the middle of the list says “Looking for deleted items…”; an empty list then says what it means (“Nothing kept yet”, “No deleted items in “Invoices””). Mark one or several: Put Back returns them to where they were (a file there now is kept as an earlier version first; the next sync carries them to the other side), Restore To… copies them into a folder you choose, Show in Panel goes to the kept copy. The line below says how much they take and how long they are kept; Change… opens the job’s form, where the days are set (30 unless changed; 0 keeps them for good). Missing a file? In the folder where it was, Tools › Show Deleted Items (or right-click on empty space) opens its job’s Deleted Items for that folder and below; the button with the folder’s name shows the whole job again. It is grayed outside the folders of your sync jobs.
- History lists the job’s runs, newest first (the last 100), with what each did and what failed; choosing one shows its log below. Filters (⇧⌘F, the funnel below the jobs) lists what is left out and what alone is synced; patterns are typed or picked with Add File… / Add Folder…, which browse the job’s own folders, on this Mac or on a server: the left one first, Left | Right switches (a pattern starts at the top of the job’s folders, so it is the same for both; the switch matters for an item on one side only), double-click or Return opens a folder, ⌘↑ goes up (never above the job’s folder), Hidden items shows those too. Temporary, hidden, big or old files can be left out. The job’s form (Edit Job…, ⌘E) has Choose… beside each folder: On This Mac… (the Mac’s own dialog) or one of your servers and clouds (Oliver’s browser, at the typed folder when it is on that server; Choose takes the selected folder, or the one shown). A run copies several files at once: on this computer up to At once in the job (10; 1–16); on a server it starts with two and adds one a second while the server takes more, and when the server refuses a connection (or a call takes far too long) it goes on with one less and tries the refused file again, so nothing fails because of it. It remembers what each server took, so the next run gets there faster; a limit only when the server refused with an error, and each later run tries one more. The line under the rows says how many go at once now, and the run’s report says when a server held it back, and why. The analysis reads a server folder’s whole tree in one request (rclone reads several folders at once), as MultiSync does.
- A backup still matters. Deleted Items, the Trash and Undo catch most mistakes, but as with any program that syncs, keep a backup of the folders that matter (Time Machine is enough) before setting up your first job.
- Import Sync Jobs (Tools) brings over MultiSync’s jobs, with what they last synced, and GoodSync’s jobs (names, folders, excludes and the hidden-files setting; never its logins). They come without automatic runs, so the old program and Oliver never sync the same folders at once; turn them on in the job once the old program is retired. GoodSync’s jobs remember nothing yet, so their first run merges both sides and deletes nothing. Their passwords aren’t taken over: the import lists the servers that need their login, and Analyze asks for it once (it goes into the Keychain). The menu-bar helper Oliver Sync runs jobs on a schedule or when files change, also when the main window is closed.
Finding files
Find Files (⌥F7, ⌘F or ⌃F) takes the left panel’s place: what to look for on
the left, what is found in the right panel. It searches by name (*.pdf, a word, or a
regular expression), by content (text in any encoding, a regular expression, or hex bytes),
size (at least, at most, in KB, MB or GB), date and depth, also inside archives and on
servers. In starts as the folder of the panel you were in. Return in a field (or
Search) searches; the matches come into the right panel as they are found, by their path
below the folder, and the keys go there: F3, Space, F5 and the rest work on
them as in any folder, .. goes back to the folder searched. Tab goes between the
results and the fields. Esc stops a search that runs; otherwise it (or ‹, or ⌘W)
brings the left panel back, and the results stay on the right until you leave them. A
search goes on when you go back; the right panel’s status line says when it is done.
In, Name and Text remember what you searched for: the arrow at the end of each lists the last 20. Recent, at the top, holds your last ten searches whole, with every setting: click one to search again. Save… keeps the search under a name, with its folder or without it (then it searches the folder of the panel you are in); saved searches are listed at the top, in the sidebar under Saved Searches and in Quick Open (⇧⌘P), and a click searches. Right-click a saved one to Rename…, Replace with Current Settings or Delete it, a recent one to Save… it or Clear Recent Searches. New Search sets every criterion back, the folder stays. Opened again on the folder searched last, Find Files shows what it found then, with the time (“Found at 10:42”); Return searches again. Recent searches stay on this Mac; saved ones go along with your settings to your other Macs.
Show in Enclosing Folder (⇧⌘R, File menu or right-click): in results (a search, the search field’s This Folder and Below, Show in Panel, the Basket, a branch view) it opens the folder the item under the cursor is in, with the cursor on it. With ⌥ (⌥⇧⌘R, or ⌥ held in the right-click menu) the other panel shows it and the results stay. Show in Finder is further down the menu, for what only the Finder does.
Duplicates: tick Same name, Same size and/or Same content to list only the files found more than once, group by group (the biggest first), with a Group column in front; sort by another column and back by Group as you like. Same content compares what the files hold (by checksum), so it reads them all; on a server that takes a while.
Tools
- Shrink Photos… (Tools): the marked pictures (and those in marked folders), here or on
a server, as new files in the other panel’s folder (its subfolders too): as JPEG (for
any computer or phone; HEIC from an iPhone becomes JPEG), HEIC (about half a JPEG’s
size) or as they are, with a longest side (keep, 4096 … 1024 pixels) and a quality. The
date taken, camera and place stay in them, and they keep the originals’ dates; the
originals stay as they are. At the end it says what it saved (“12 photos: 48 MB → 9 MB”).
It uses macOS’s own picture tool (
sips). - Edit Metadata… (Tools): the marked photos’ and videos’ tags (files on this Mac),
through ExifTool (bundled). The usual ones as fields: Date taken, Title,
Description, Keywords, Creator, Copyright, Location (
48.2082, 16.3738); with several files a field that differs says Various and, left empty, each keeps its own. Below, every tag of the first file; a value changed there goes to every file. Move Dates… moves every date taken by days, hours and minutes (a camera with a wrong clock). Remove Location… takes out the GPS tags and, for GoPro and DJI videos, the camera data tracks (settings and motion frame by frame) when they hold a place; without one they stay; DJI drones’.SRTfiles beside the videos go into the Bin. These tracks are shown but can’t be edited (no tool writes them). An empty Location means the file holds none: an Osmo Action, for one, records a place only with a phone or GPS remote connected. Each file keeps its date modified. - What Fills This Folder… (Tools): the cursor’s folder (or the folder shown), counted once with everything below it (a server in one request), then its subfolders and largest files as bars, the largest first, with their size and share; the many small files of a folder show as one line. Double-click a folder to step in, ⌘↑ or the arrow goes back, without counting again. Right-click copies an item’s address or shows it in a panel.
- Multi-Rename (⌃M): Total Commander’s masks (
[N]name,[E]extension,[C]counter,[Y][M][D]date,[N2-5]part of the name,[U]upper case…), search and replace (also several at once, or with regular expressions), a live preview with clashes in red, and Undo. What photos, videos and songs say, as Total Commander’s plugin fields do:[TY]-[TM]-[TD]and[Th].[Tm].[Ts]the date and time taken ([Td],[Tt]both at once; a file without one uses its date modified),[=camera],[=size](4032x3024),[=width],[=height],[=duration](3m05s),[=artist],[=album],[=title](empty where a file says none). They are read once a mask uses them (the Insert menu offers them). - Change Attributes: permissions (also on SFTP), the hidden flag, dates; also in subfolders.
- Checksums: create and verify MD5, SHA-1/256/512 and CRC32 (
.sfv) files. - Split / Combine: split a big file into parts and join them again, in Total Commander’s format.
- Symbolic link (⌃⇧F5): a link in the other panel to the item under the cursor.
- Shrink Videos (Tools menu, and the right-click menu’s Tools): makes DVD copies, camera
and phone videos smaller with no visible difference. Mark videos or folders (folders are
searched below, except the originals folder; a
VIDEO_TSfolder counts as one DVD; the Photos library and other app libraries are never touched). The window lists each video with what it is (format, size, interlaced, HDR) and measures them one after another in the background: three short pieces of each are converted and scored against the original with VMAF (Netflix’s measure of what viewers see), and the row shows the real size after and the score. A video that wouldn’t get at least 10 % smaller is unticked and left as it is (and a conversion that doesn’t get there is thrown away). Videos on a server are measured when converted.- Templates: Size kept, slight loss (score 90, as YouTube keeps 4K: recommended), Looks the same (score 95), Full HD, slight loss (at most 1080p, as Google Photos’ Storage saver: the smallest), and your own (Save as Template…); the window opens with the last settings used.
- Quality: the smallest setting that still reaches the score is used. Videos alike (one camera’s clips) are measured once. After converting, the whole new video is scored; if it falls short, it is converted once more a step better. Fixed value skips measuring.
- Encoder: x265 (smallest files; about real time for 1080p and a fifth of it for 4K on an M1 Max; the same on Windows) or Apple’s own encoder (20–40 times faster, bigger files). Effort: Medium by default; Slow takes twice as long for a few percent.
- Picture: keep its size, or at most 2160, 1080, 720 or 576 lines. Interlaced video (DVDs, camcorders) is smoothed into whole frames at the field rate, so motion stays smooth.
- Sound is copied where the container takes it; uncompressed sound becomes AAC. Subtitles are kept; picture subtitles (DVDs) only fit in MKV.
- Container: automatically MKV for DVDs and videos with picture subtitles (VLC plays them), MOV stays MOV, the rest MP4.
- GPS and other metadata: an MP4 or MOV gets its new picture inside a copy of the
original, so every other track stays as it was: GPS and telemetry (DJI, GoPro), timecode,
sound, subtitles, a cover picture, and every tag of the file (recording date, place,
camera). Afterwards every track and tag is checked; a video that would lose one is left
as it is (Keep GPS and other data tracks, on by default). Files beside a video with its
name (a drone’s
.SRTwith its GPS,.LRF,.THM,.LRV,.XMP) stay with the new file, and a moved or renamed original gets copies of the small ones. The new file gets the original’s dates. - Originals: a new file beside the original (named by a pattern,
[N]is the original’s name), the originals moved into a folder (Originalsbeside them, or a path), the original renamed ([N] (original)) with the new file taking its name, or the original replaced (to the Trash; on a server, which has none, deleted). Nothing happens to an original before its new file is checked: same length, its sound tracks, decoded through. - Convert runs in the transfer list: Pause, Stop (the half-made file is removed). Videos on a server are fetched, converted on this Mac and sent back. Quitting the app ends a conversion under way. At the end a message lists each video: its size before and after and its quality score, or why it was left as it was.
- Command line (⌘L):
cd foldermoves the panel; anything else runs in Terminal in the panel’s folder. ⌃↩ puts the cursor’s name there, ⌃⇧↩ its full path. - Open in Terminal (⌥⌘T): Terminal in the panel’s folder; on an SFTP server, an SSH session to it.
- Your terminal: Settings › General › Open in Terminal, the command line and SSH use:
Terminal, iTerm, Ghostty, kitty, WezTerm, Alacritty or Warp (those on this Mac are
listed), or A Line of My Own: a command that starts your terminal, with
{script}(the script to run) and{folder}(the panel’s folder), e.g.open -na MyTerminal --args -e {script}. iTerm is started through its scripting, so macOS asks once whether Oliver may control it. Warp can only be told a folder: commands and SSH still open in Terminal, and Oliver says so. - My Commands (Tools › Edit My Commands…): your own commands, with keys and buttons
above the panels. Placeholders:
%Pthis panel’s folder,%Tthe other panel’s folder,%Nthe name under the cursor,%Oit without extension,%Eits extension,%Fits full path,%Sthe marked names,%Ltheir full paths. - Services (right-click): the Mac’s services for files, as in the Finder. The Finder’s own Open, Show in Finder and Show Info in Finder appear there too (macOS adds them; an app can’t take single ones out). To hide them everywhere: System Settings › Keyboard › Keyboard Shortcuts › Services › Files and Folders.
- iCloud Drive and cloud folders (OneDrive, Google Drive, Dropbox in your Library’s CloudStorage): an item only in the cloud shows the Finder’s cloud after its name. The right-click menu offers Download Now and Remove Download (the copy on this Mac goes; the item stays in the cloud). OneDrive’s “Always Keep on This Device” is OneDrive’s own and stays in the Finder: Show in Finder gets you there.
Settings and files
- Activity: the toolbar button lists what runs and what finished this session, newest first: what each job did, how long it took, what failed and why, with Try Again, As Administrator… and Show. Syncs are listed too: a running one with Show, a finished one with what it did and Open Job, an analysis waiting for you with Review. A red dot on it means something failed and you haven’t looked yet, an orange one that an analysis waits; a job’s end no longer brings a sheet.
- The toolbar has Total Commander’s buttons: the views, back and forward, Refresh, Branch View, Invert Marks, Pack, Unpack, Network, Find Files, Multi-Rename, Compare, Synchronize, Edit, Terminal, then Share, Tags, Action, Activity, Search and the preview pane’s button. Point at a button to see what it does and its key. View › Finder-like Toolbar makes it calm, as the Finder’s (back and forward, the views, Network, Synchronize, Share, Tags, Action, Activity, Search, the preview pane); View › Total Commander’s Toolbar puts the full set back; Customize Toolbar… (right-click) changes it.
- Connect to Server (⌘K) is a panel: choose the kind on the left, fill in the server, port, user and folder (or paste a whole address into the server field), or pick a saved server. Go › Servers… lists the saved servers with Connect, Test (does it answer, does the login work) and Forget Login.
- NFS and Share Screen: Connect to Server’s NFS kind mounts
nfs://server/exportthe way the Finder does (it is macOS’s connection, under /Volumes; Eject disconnects it). A server’s location menu has Share Screen, which opens macOS’s Screen Sharing. - The preview pane: View › Preview Pane (⌥⌘P, or the toolbar’s
button at the far right, blue while the pane shows) shows, at the right of both panels, the item
under the active panel’s cursor: a preview of pictures, PDFs, text, media and Office files
(on a server, a thumbnail of a picture or the start of a text file), else its icon; below
it the name, kind and size. A folder on this Mac is counted (items and size) while the
cursor rests on it; on a server, in an archive or for
.., Calculate Size counts it. Then General: where it is, the exact size, created, modified and added, and Hidden, Hide extension and Locked (a click changes them; items on this Mac only). A photo, video or song shows what it says about itself (taken, dimensions, duration, camera, place with Show in Maps, title, artist, album). Permissions are boxes for read, write and run of the owner, the group and everyone, with the number (644) and the owner’s and group’s names; a click changes them, on this Mac and on SFTP (there Show Permissions asks the server first). With two or more items marked, it shows how many and their size. Drag the pane shut or choose the command again and it is gone; its width is kept. ⌃Q’s Quick View in the other panel stays as it is. - More windows: File › New Window (⌘N) opens another window with its own two panels, at the folders of the one you’re in. Each window shows the jobs started from it; Activity lists them all. Only the first window is remembered when you quit.
- The header: one row per panel: the disk or server (its menu), the
path, the filter, the hotlist (★) and the history (clock). The free space is at the status
line’s right end. Total Commander’s
\and..buttons come back with Settings › General. Tabs have a “+” after them; a middle click closes a tab; a tab’s right-click menu can close the others or move it to the other panel. - The Dock and notifications: while jobs run, the Dock icon shows how many and how far they got; when a job of ten seconds or more ends, or one fails, while Oliver isn’t in front, a notification says so (a click opens Activity). Settings › General switches the notifications off.
- The sync screen: the job list’s ⋯ holds Edit, Filters, Deleted Items, History and Import; Why says it in a few words (the full reason in its tip).
- Settings (⌘,): options, transfers, the keys of every command, and your commands. In sections: General, Panels, Transfers, Sync, Keys (it says when a key is given to two commands), My Commands, Advanced. Language (General): English, Deutsch, Français, Español, 简体中文 or 日本語. Until you choose one, Oliver speaks the first of your Mac’s languages (System Settings › General › Language & Region) that it has, else English. A choice takes effect when Oliver starts again (it offers to restart now); the menu-bar sync helper follows it. Dates and sizes are written in that language, in your region’s order. Appearance (General): Match the Mac, or Light or Dark whatever the Mac uses; every window changes at once (Quick Look’s window stays dark, as macOS’s own). Dim the inactive panel (on) makes the panel the commands don’t work on fainter, besides the bar in the accent colour along the active one’s top.
- Settings › Transfers:
- Files at once to or from a server: 1 to 8, 4 unless changed. Fewer for a server that refuses connections or slows down with more; more for many small files over a slow line. It holds for copies started after the change. Copies between two disks of this Mac always go 4 at once; sync jobs have their own At once.
- When the connection drops or the server is busy: how often such a file is tried again by itself (never to 5 times; twice unless changed), after 2, 4, 8… seconds. A missing file, a full disk, a refused login or a lack of permission fail at once, as before. When three files in a row failed even after their tries, the server is most likely gone, and the rest of the job no longer waits for tries.
- Limit the speed to and from servers: an upload and a download limit in MB/s (empty: none that way), so a big copy leaves room for the rest of the network. It holds at once, also for copies already under way, for everything that goes to or from servers and clouds: copies, sync runs in the window, the viewer. Copies between disks of this Mac aren’t limited. The limits stay when the switch is off. The menu-bar sync helper takes a change when it starts again.
- Oliver instead of the Finder for other apps: Settings › “Other apps’ “Show in Finder” shows files here instead”. Then Chrome’s “Show in folder”, Mail’s attachments and other apps’ “Show in Finder” show the file in a panel, with the cursor on it: in a tab already showing its folder, else in a new tab. Apps already open keep using the Finder until you quit and reopen them. Folders opened from the Dock or Spotlight still open in the Finder, and Oliver’s own Show in Finder still goes to the Finder. Switching it off gives everything back to the Finder.
- Everything is kept in plain text files in
~/Library/Application Support/Commander(the app’s working name):settings.toml,keys.toml(keys you changed),commands.toml,hotlist.toml,logins.toml(servers and how to log in; passwords are in the Keychain),known_hosts(trusted SSH servers),server-names.tomlandsync-jobs.toml. They can be kept in step between your computers through a folder of your choice.
Licence
Test versions only, for now (2026-11-20): Oliver isn’t on sale yet, and other copies have no licence and lock nothing.
- Trying Oliver: everything works for the first 30 days. After that the file manager keeps working, with a reminder at most once a day at the start; sync jobs, clouds (Google Drive, OneDrive, Dropbox, S3) and the video and photo tools (Shrink Videos, Shrink Photos, Edit Metadata) need a licence. A sync job still analyzes and shows what it would do; Sync asks for the licence. Synchronize Folders (the two panels) keeps working.
- Oliver › Licence… shows where you stand. Paste the key from the mail (the whole of it,
starting with
oliver1.; line breaks don’t matter) and click Activate. Buy Oliver 1… opens the shop. - Up to three Macs at once with one key (five for Small business). To move Oliver to another Mac, click Deactivate This Mac… on the old one first. A Mac you can’t reach any more (sold, broken) frees its place by itself after 60 days without contact.
- Without the internet: Oliver checks with its server once a day when online. A licensed Mac keeps everything for 60 days without contact; after that, sync, clouds and the video and photo tools wait until Oliver reaches its server once (Check Now). The file manager never stops.
- Test versions end on a day they show in Oliver › Licence…, two weeks after they were made; then Oliver offers the new one’s download. Your settings and sync jobs stay.
Oliver › About Oliver shows the version and the day it was built, where the licence stands, and who makes Oliver (Olika Tools, olikatools.com). Acknowledgements lists the open-source software that comes with Oliver (rclone, 7-Zip, FFmpeg, x265, libvmaf, GPAC, ExifTool, and the Rust and Go libraries inside), each with its licence text (⌘F searches it).
All keys
The keys as they are set now; Settings (⌘,) changes them. Most commands also have Total Commander’s key; each F-key also works as ⌥ with its digit (⌥5 is F5).